Publicidad
Idiomas disponibles
Idiomas disponibles
a) Push down the parking brake pedal (A) fully and
pull up the parking brake lock (B).
b) Release the parking brake pedal.
•
To release the parking brake, push down on the
parking brake pedal and release it.
To engage and disengage the cutting
deck (TS 112)
WARNING:
deck without a deflector installed to the
grass discharge.
•
Move the blade engagement control to the engaged
position (A) to engage the cutting deck.
•
Move the blade engagement control to the
disengaged position (B) to disengage the cutting
deck.
To engage and disengage the cutting
deck (TS 114)
WARNING:
deck without a deflector installed to the
grass discharge.
1825 - 003 - 08.02.2023
A
Do not operate the cutting
A
B
A
Do not operate the cutting
•
Pull out the PTO button to engage the cutting deck.
B
•
Push in the PTO button to disengage the cutting
deck.
To set the cutting height (TS 112)
•
Pull the cutting height lever in the direction of the
seat and put it in 1 of the notches for the correct
cutting height.
B
To set the cutting height (TS 114)
•
Pull the cutting height lever in the direction of the
seat and put it in 1 of the notches for the correct
cutting height.
To operate the product
1. Start the engine. Refer to
page 16 .
To start the engine on
17
Publicidad
