Würth POWERQUAD M Traducción Del Manual De Instrucciones De Servicio Original página 9

Information for operation
Operating modes:
• upright, to a tilt angle of 90°
• horizontal (with upward light emission)
• suspended (mounted on a hook or a tripod).
Attention!
In case of exposure to splash water
connect the device only to IPX4
sockets!
Mounting on a tripod
Art.
One or two lamps mountable
0981 180 501
with mounting rail
0981 180 511
Item no. 0981 180 591 on
0981 180 502
tripod item no. 0981 100 1/
0981 180 512
0981 101 1
Attention!
If your lamp is equipped with
a plug, it is not admissible to
mount the device on a tripod
with an angle exceeding 90° if
exposed to splash water! Ma-
ximum mounting height may
not be exceeded!
Intended use
This appliance/product is designed for professional
use in industry and trade. The appliance/product is
used as intended if it is used exclusively for illumi-
nating ordinary work areas and if the specifications
stated in the technical data are observed. Any other
use or use beyond this is not permitted.
Foreseeable misuse
The appliance must not be used,
• in areas with harmful gases, oils, acids, radiation,
etc.
• in potentially explosive atmospheres
Legend
Explanation of pictograms
Lamps with limited surface temperature
Dust-proof
Splash water-proof
Compliance with EU directives
Electronic scrap (WEEE directive)
Permitted in difficult conditions
Protection class II
Maintenance / care
Attention!
Clean the device only when the mains
plug has been removed.
Clean the lamp with hot water, or if necessary
■
with a standard detergent.
Do not use any technical solvents, acetone,
benzene, tetrachloromethane, etc.
Likewise, do not leave in contact with oils or
■
grease for long periods.
A damaged lead may only be exchanged
■
by the manufacturer or an authorised service
company.
9