Publicidad
Idiomas disponibles
Idiomas disponibles
WATER SUPPLY HOOKUP (CONTINUED)
2. Insert the plastic coupling wing nut, plastic washer and
rubber seal over the end of the water supply line (not
included).
3. Connect the water supply line to the ballcock shank
that extends below the toilet tank by tightening the
plastic adapter with rubber washer over the end of the
ballcock shank.
CAUTION: Do not over tighten. Ballcock shank may
split and void the warranty.
ROUGH-IN
special precautions to ensure that toilet does not tip over
and break.
Connect the rear discharge toilet to the front inlet of the
Powerflush Optima Pro via hose clamps. Ensure the
connections are according to local, regional and state
codes.
Toilet assembly is top heavy. Take
2
Plastic Coupling
WIng Nut
3
Rubber Washer
Plastic Adapter
11
Rubber
Seal
Plastic
Washer
Water Supply Line
(Not Included)
IL1738
Ballcock
Toilet
Tank
IL1739
Publicidad
