ADDING OTHER BATHROOM FIXTURES
1. PowerFlush Optima is designed to accept additional
bathroom fixtures utilizing the two side inlets.
2. Additional fixtures can be attached either to the 2
in. MPT (outside diameter) or the 1½-in. slip (inside
diameter). These side inlets are sealed by the factory
to prevent leaks when inlets are not used. Before use,
these side inlets must be drilled out using a 1¾-in. hole
saw.
3. When utilizing side inlets, install a check valve on the
incoming line.
1
Tub
2
Drill Point
IL1760
3
18
Sink
Grinder
Pump
Unit Side
Inlets
IL1759
2" MPT
Outside
1-1/2"
Slip Inside
Check
Valve
IL1761