KP6
•
Misuse can cause fluid to leak from inside the battery. In case of contact with
the liquid, rinse well with water and consult a doctor. Battery fluid can cause
injury and burns.
3.2. MACHINE SAFETY REQUIREMENTS
The chainsaw is safe if it meets the following requirements:
•
The chain is not damaged and in optimal lubrication and sharpening
conditions.
•
The chain tension is correct.
•
The bar is not deformed or damaged.
•
The bar groove is in good condition.
•
The chainsaw is clean and dry.
•
The handle is in good condition.
•
Safety switch and trigger operate normally.
•
The control circuit works normally and has not been modified.
•
Lubrication works normally.
•
The depth of the toothed groove between the wheel and chain does not
exceed 0.5 mm. Bar and chain are assembled correctly as specified in this
manual.
•
All accessories used are compatible and original.
•
The oil cap closes properly.
26
www.gruposanz.es