Keeper KP 6 Manual De Uso página 30

KP6
6. PROBLEMS AND SOLUTIONS
Have the tool repaired exclusively by qualified personnel from our service
centers, using only original parts as spare parts. This will guarantee the
durability and safety of the tool.
Problem
Battery discharged.
The
chainsaw Battery not connected.
doesn't start
Bad work of the switch.
Internal connection loose
Intermittent
work
Bad work of the switch.
Damaged chain.
Chain
extremely Little lubrication.
hot
Damaged bar.
Friction and excessive
temperature due to lack of
lubrication.
Badly sharpened or dam-aged
Bad cutting
chain.
surface
Poor- and poor-quality cut.
The battery is not fully charged.
The battery is not properly
inserted into the battery charger
connector.
The battery
The charger is not properly
connected to the power outlet.
is not
recharging
Dirty battery contacts.
Damaged battery.
Damaged charger.
30
Cause
Watch the video through the following
link or QR:
www.tiny.cc/troubleshootingkp6
www.gruposanz.es
Solution
Charge the battery.
Connect the battery.
Send to the ASS assistant.
Send to the ASS assistant.
Replace the chain.
Check the lubrication
system.
Replace bar.
Check the lubrication
system.
Replace the string.
Read the instructions
carefully.
Charge the battery.
Insert the connector
correctly.
Connect correctly.
Clean the contacts.
Replace the battery.
Replace charger.