Keeper KP 6 Manual De Uso página 29

KP6
11
5.2. CHECKING THE OIL DRAIN CHAIN
1. Place the guide plate of the chainsaw directly on the clean floor.
2. Start the chainsaw.
After manual lubrication, the oil will be expelled to the ground. This will
indicate the correct lubrication of the parts of the chainsaw. (Image 12) If it
does not expel oil:
3. Refill the chain oil.
4. Recheck the oil.
5. Do not use chainsaws without oil and contact the supplier as soon as possible.
12
5.3. SPARE PARTS
The manufacturer can supply original spare parts:
1. Battery.
2. Bar.
Contact our technical service or distributor if necessary.
3. Battery charger.
4. Chain.
www.gruposanz.es
Watch the video through the
following link or QR:
www.tiny.cc/maintenancekp6
29