Turn off the spray lance first, hold the rear part of spray nozzle, then turn the front part of
spray nozzle clockwise, Water may be sprayed out from the spray nozzle in fan shapes
(fig 1); Turn the front part of spray nozzle wither shins, Water may be sprayed out from
the spray nozzle linearly (fig 2).
CAUTION: Water should be sprayed out from the spray nozzle in fan shapes (fig 2),
when cleaning the car or other vehicle.
Using High Pressure:
Please make sure the trigger released and there is not any water spraying. then turn the
rear part of spray nozzle withershins ( fig 4). Squeeze the trigger, the gun will spray
water with high pressure.
Using low pressure:
Please make sure the trigger released and there is not any water spraying. then turn the
rear part of spray nozzle clockwise ( fig 3). Squeeze the trigger, the gun will spray water
with low pressure.
CAUTION: Selection of high or low pressure by turning action. The selection of the
pressure must be carried out with the gun in closed position.
Fig 1
Fig 4
The water inlet filter must be inspected regularly, so as to avoid blockage and restriction
in the water supply to the pump (fig 5).
ADJUSTABLE SPRAY NOZZLE
Low/High Pressure Adjustable Lance
WATER INLET SCREEN
Fig 2
Fig 5
6
Fig 3