Descargar Imprimir esta página

Fysic B26/FB150 Manual De Usuario página 86

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
Guidance and manufacture's declaration – electromagnetic emission
The device is intended for use in the electromagnetic environment specified below. The customer
of the user of the device should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emission
CISPR 11
Harmonic
emissions IEC
61000-3-2
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Recommended separation distances between
portable and mobile RF communications equipment and the device
The device is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the device can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the device as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum output
power of transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Compliance
Electromagnetic environment – guidance
The device use RF energy only for its internal function.
Group 1
Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
Class B
The device is suitable for use in all establishments, including
Not applicable
domestic establishments other than domestic and those
directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes.
Not applicable
Separation distance according to frequency of transmitter (m)
150 KHz to 80 MHz
0.12
0.38
1.2
3.8
12
80 MHz to 800 MHz
0.12
0.38
1.2
3.8
12
18
800 MHz to 2.7 GHz
0.23
0.73
2.3
7.3
23

Publicidad

loading

Productos relacionados para Fysic B26/FB150