A first aid kit in accordance with ISO 3864 should always be readily available
for a possible accident. Initiate the violation in accordance with the necessary
first aid measures. When requesting support, provide the following details:
1. Place of accident
3. Number of injured people
HOLZMANN MASCHINEN GmbH
Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine stops.
Always disconnect the machine prior to any actions performed at the
machine.
Avoid unintentional starting
Do not use the machine with damaged switch
The plug of an electrical tool must strictly correspond to the socket. Do
not use any adapters together with earthed electric tools
Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire, cutting injury;
Protect the machine from dampness (causing a short circuit)
Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
Check the cable regularly for damage
When working with the machine outdoors, use extension cables suitable
for outdoor use
Do not use the cable to carry the machine or to fix the work piece
Protect the cable from heat, oil and sharp edges
Avoid body contact with earthed
Before starting the machine remove any adjusting wrenches and
screwdrivers
Use a clip or clamping jaws to secure the workpiece
Do not fix the workpice with your hands
Rotating parts can cause severe cut injuries
Keep the drills sharp and clean, so they get stuck less often and are
easier to guide
Keep any machine that is not being used out of reach of children
Emergency procedure
www.holzmann-maschinen.at
N O T I C E
2. Type of accident
4. Injury type(s)
SAFETY
35
SB 4132SM