B.Pro BC HP 700 Manual De Instrucciones página 22

en
7. Faults and fault rectification
Check any faults in the appliance against the following table:
Fault
The green and
yellow indicator
light does not il­
luminate when
switched on.
The appliance is
switched on but
does not heat
up.
If you cannot remedy the fault,
‒ switch off the appliance and disconnect from the mains,
‒ do not open the housing,
‒ contact the authorised Customer Service agent.
8. Technical specifications
Hotplate
Item No.
Total connected load
Voltage
Fuse
Thermal output, sensitive
Thermal output, latent
External dimensions (LxWxH)
Weight
Degree of protection against water
Appliance noise level
We reserve the right to make technical changes!
22 / 76
Possible cause
Main switch before appliance
not turned on.
There is no power supply at
all.
Mains fuse on site has
tripped.
The appliance is overheated.
Action
Turn on main switch.
Inform the power supply company
.
Possible faults on the appliance must
be checked by an authorised Customer
Service agent.
Reset the circuit breaker.
Allow the appliance to cool.
If the fault continues to occur, contact
the authorised Customer Service.
BC HP 700
00574213, 00574369
0.7 kW
230 V 1 N 50/60 Hz
1 x 16 A
0.10 kW
0.14 kW
400 x 620 x 240mm
approx. 18 kg
IP X4
< 70 dB (A)