B.Pro BC PC 4800 Manual De Instrucciones página 24

en
7. Faults and fault rectification
If faults should occur, check them using the following table:
Fault
The green indi­
cator light does
not illuminate
when switched
on.
The appliance
does not heat up
and both yellow
indicator lights
are off.
If the fault cannot be rectified:
‒ switch off the appliance and disconnect from the mains,
‒ do not open the housing,
‒ contact the authorised Customer Service agent.
8. Technical specifications
Pasta cooker
Item No.
Total connected load
Voltage
Fuse
Thermal output, sensitive
Thermal output, latent
Steam output
External dimensions (LxWxH)
Weight
Degree of protection against water
Appliance noise level
We reserve the right to make technical changes!
24 / 80
Possible cause
Main switch before appliance
not turned on.
There is no power supply at
all.
Mains fuse on site has
tripped.
For example, the appliance
has been overheated due to
heating when dry. The tem­
perature limiter has tripped.
Remedy
Turn on main switch.
Inform the power supply company.
Possible faults on the appliance must
be checked by an authorised Customer
Service agent.
Reset the circuit breaker.
Switch off the unit.
Wait until the appliance has cooled
down.
Pour water into the tank.
Switch on the appliance.
If the problem occurs again, have the
appliance checked by authorized cus­
tomer service.
BC PC 4800
00574210
4.8 kW
400 V 3N 50/60 Hz
3 x 16 A
0.6 kW
0.96 kW
1.41 kg/h
400 x 620 x 240 mm
approx. 14 kg
IP X4
< 70dB (A)