VONROC SP510DC Traducción Del Manual Original página 6

EN
TECHNICAL SPECIFICATIONS
Model No.
Application
Voltage
Input power
Max. flow rate
Max. pressure
Mas. pumping height
Max. particle size
Min. residual water height
(manual operation)
Submersible depth
Submersible depth excl.
extention part
Submersible depth incl.
extention part
Max. water temperature
Protection class
Protection control unit
Protection pump
Dry running protection
Built-in thermal protector
Working time (with a fully
charged battery)
Recommended battery*
Weight
Model No.
Battery type
Voltage
Capacity
Recommended charger*
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Recommended battery*
Weight
6
SP510DC
Clean water
12V
50W
1500 l/h
1.1 bar
11 m
1 mm
12 mm
53-100 cm
53-79 cm
75-100 cm
35°C
Class III
IPX4
IPX8
Yes, after 20 sec.
Yes
30 min.
CD822AA
1.15 kg
CD822AA
Lithium-Ion
12V
2.0 Ah
CD823AA
0.2 kg
CD823AA
100-240V~
50/60Hz Max. 0.5A
13.5V
•
0.8A 10.8W
2.5 hour
CD822AA
0.085 kg
*Only use the recommended battery and charger. Us-
ing any other batteries or chargers could cause seri-
ous injury or damage the pump, charger or battery.
TECHNICAL SPECIFICATIONS
The numbers in the text refer to the diagrams on
page 2-3.
1. Carry handle
2. Battery LED indicators
3. On/off switch
4. Base / Filter cover
5. Pump
6. Water outlet (pump)
7. Extention part
8. Upper pipe
9. Clamp
10. Hose
11. Quick coupler
12. Water flow regulator
13. Water flow regulator knob
14. Hose connector
15. Filter
16. Battery
17. Battery unlock button
18. Charger
19. Cable lock
20. Cable hook
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Assembling the rain barrel pump (Fig. A, B, C)
1. Screw the extension part (7) on the water outlet
(6).
2. Screw the upper pipe (8) on the extension part (7).
3. Wind the cable and bind it, as shown on figure C.
Inserting the battery into the machine (Fig. D-1)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (16) into the machine as
shown in Fig. D-1.
2. Push the battery further forward until it clicks
into place.
WWW.VONROC.COM