EZiclean iMap A100 Manual Del Usuario página 18

If you have any doubts about the behaviour of your robot, first refer to the table below.
Alerts
The blue light is always on
The blue light flashes
The red light is always on and the
buzzer rings once
The red light flashes slowly and the
buzzer rings once
The red light is always on and the
buzzer rings twice
The red light flashes quickly and the
buzzer rings three times
The red light is always on and the
buzzer rings three times
Frequently asked questions
Reason / Cause
Normal operation
Charging phase
Floor detection error
Side brush overload
Fan error
Driving wheel over-load
Collision switch error
Solution
Put the robot back on the floor
Check and clean the side brush.
Remove any hair and dust.
Check the fan
Check the driving wheel
Remove any hair and dust
Check the sensitivity of the
bumper if any foreign objects