Indel Webasto Marine isotherm DR49 Instrucciones Para La Instalación Y El Uso página 55

User Manual
7 Dimensions
Model Width
(mm)
[W]
DR 49 400
DR 49 CUSTOM 385
DR 55F NO FROST 470
DR55 NO FROST
CUSTOM 455
DR 65 470
DR 65 NO FROST 470
note(1) depth that takes into account the curvature of the tube at the point of tube exit from the trunk
"D"=35mm
note(2) depth that takes into account the curvature of the tube in the case of remote control "D"=80mm
(the tube is very rigid)
note(3) condensation draining (H)+70mm
FOR AC/DC VERSIONS, KEEP IN MIND THAT, DUE TO LACK OF SPACE, DEPTHS EXCEEDING 50 mm WILL
HAVE TO BE EVALUATED ON A CASE BY CASE BASIS.
AS PER REGULATIONS AND FOR PROPER OPERATION, THE WALLS IN THE REGRIGERATOR SHOULD BE SET
AT THE FOLLOWING DISTANCES: 20mm ON WALLS WHERE THERE IS NO COMPRESSOR AND 50mm ON THE
WALLS WHERE THE COMPRESSOR IS PRESENT. AS STANDARD, 20mm IS ADVISABLE ON LATERAL WALLS
WITHOUT FLANGE 0mm WITH FLANGE, 50mm FROM THE REAR WALL AND 50 mm FROM THE UPPER
WALL. IF THESE DISTANCES ARE NOT COMPLIED WITH, THE MINIMUM DISTANCE MEASUREMENTS MUST
BE 5mm AND THE MATERIALS WITH WHICH THE WALLS ARE MADE MUST BE EXPLOSION PROOF.
Height Depth Door
(mm) (mm) [D] Thickness
[H] (mm) [S]
520 510 /
520 515 /
526 560 /
525 570 /
526 545 /
526 560 /
Cut-Out Flange Size (mm)
(mm) Left:Right:Top:Bottom
W:H
405:525 20:20:20:/
389:522 /:/:/:/
475:531 20:20:20:/
459:527 /:/:/:/
475:531 20:20:20:/
475:531 20:20:20:/
Notes
55