Publicidad
Idiomas disponibles
Idiomas disponibles
DOOR CONSTRUCTION
Items Needed:
GG - #10-24 Hex Nut (Qty: 8)
FF - 3/16in Washer (Qty: 8)
NN - Left Hinge (Qty: 2)
PP - Right Hinge (Qty: 2)
EE - #10-24 Carriage Bolt (Qty: 8)
E - Door Left (Qty: 1)
F - Door Right (Qty: 1)
Process:
• Attach the NN and PP Hinges to the Doors using (8)
EE, (8) FF, and (8) GG. Wrench tighten.
Note: The hinges for both doors MUST be mounted so the
Hinge Pin points UP at the TOP of the door and DOWN at
the BOTTOM of the door.
• Make sure to insert hinges through slots.
Figure 8
Left side door shown
GG
Top
Bottom
Figure 8.1
EE
NN
FF
EE
PP
FF
GG
DOOR HINGE ATTACHMENT
Items Needed:
AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 4)
CC - 5/16-in Washer (Qty: 4)
DD - 1/4-20 Serrated Flange Nut (Qty: 4)
RR - Hinge Plate (Qty: 2)
Process:
• Slide the left door hinge pin PP into the lower hinge plate
RR.
• Slide the hinge Plate RR onto the upper door hinge pin
NN. (Figure 9.1)
• Attach the left door E by mounting the upper hinge RR,
using (2) AA, (2) CC and (2) DD.
• Attach the right door F in the same manner.
• Adjust Doors for optimum performance before tightening
screws.
RR
AA
Figure 9
NN
E
Figure 9.1
6
CC
DD
RR
Publicidad
