Husky 32FC01BP-THD Manual Del Operador página 7

LOCK INSTALLATION
Items Needed:
KK - Single Bitted Lock (Qty: 1)
Process:
• Assemble the Single Bitted Lock KK.
Figure 10
GROMMET INSTALLATION
Items Needed:
JJ - Grommets (Qty: 5)
Process:
• Attach (2) Grommets JJ into the holes provided
in C.
• Attach (3) Grommets JJ into the holes provided
in D.
C
D
JJ
MAGNET INSTALLATION
Items Needed:
HH - Magnet (Qty: 2)
Process:
• Place the Magnet HH on the right door in the locations
noted.
• Make sure the adhesive backing is facing towards the
cabinet.
• Close the door to double check the Magnets are in the
correct positions.
• Open the door and remove the protective covering over
the adhesive on the back of the magnet.
• Close the door and press firmly on the front of the door to
seat magnets.
• The magnets will now be attached to the cabinet shell in
the correct location.
Figure 12
7
1.50-in
(3.81cm)
1.00-in
(2.54cm)
1.00-in
(2.54cm)
1.50-in
(3.81cm)