Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

STYLE SELECTIONS and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.
Serial Number _______________ Purchase Date _______________
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at
partsplus@lowes.com.
AS22230
ELECTRIC FIREPLACE
MEDIA MANTEL
ATTACH YOUR RECEIPT HERE
1
ITEM #4976292
MODEL #1730FM-23-273
Español p. 23

Publicidad

loading

Resumen de contenidos para Style selections 1730FM-23-273

  • Página 1 ITEM #4976292 ELECTRIC FIREPLACE MEDIA MANTEL STYLE SELECTIONS and logo design are trademarks or MODEL #1730FM-23-273 registered trademarks of LF, LLC. All rights reserved. Español p. 23 ATTACH YOUR RECEIPT HERE Serial Number _______________ Purchase Date _______________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 877-888-8225, 8 a.m.
  • Página 2 TABLE OF CONTENTS Package Contents ..........................3 Hardware Contents..........................4 Safety Information ..........................4 Preparation ............................8 Assembly Instructions.......................... 8 Maximum Recommended Weight Loads ................... 16 Operating Instructions ........................17 Care And Maintenance ........................19 Troubleshooting ..........................20 One-Year Limited Warranty ....................... 21 Replacement Parts List ........................
  • Página 3 PACKAGE CONTENTS PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY Shelf Center Shelf Fireplace Brick Wall Left Middle Wall Fire Log Right Middle Wall Fireplace Grate Left Outer Wall Remote Control (Battery Inside) Right Outer Wall Fireplace Glass Front Left Door Base Panel Right Door Base Panel Rail Center Back Panel...
  • Página 4 HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE) PART DESCRIPTION QUANTITY Shelf Pin Bolt Bolt with Knob Tip Restraint Hardware Touch-up Pen SAFETY INFORMATION Please read and understand this entire manual before • Reorient or relocate the receiving antenna. attempting to assemble, operate or install the product. •...
  • Página 5 SAFETY INFORMATION (CONTINUED) • DO NOT route cord under furniture or appliances. Modifications not approved by the party responsible Arrange cord away from traffic areas and where it for compliance could void user’s authority to operate the equipment. will not be tripped over. •...
  • Página 6 SAFETY INFORMATION (CONTINUED) • To avoid electric shock, fire, or injury, review the • To disconnect this appliance, turn controls to the assembly instruction to confirm that the appropriate OFF position, then remove plug from outlet. critical components and accessories are being used •...
  • Página 7 SAFETY INFORMATION (CONTINUED) Electrical Connection Grounding Instructions • A 15-Amp, 120-volt, 60 Hz circuit with a properly • This heater is for use on 120-volt. The cord has a grounded outlet is required. Preferably, the fireplace plug as shown below. See illustration or grounding will be on a dedicated circuit as other appliances instruction.
  • Página 8 PREPARATION Before beginning assembly of product, make sure Estimated Assembly Time: 50 minutes all parts are present. Compare parts with package Tools Required for Assembly (not contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the included): Phillips screwdriver product.
  • Página 9 ASSEMBLY INSTRUCTIONS (CONTINUED) 2. Insert the assembled base panel rail (S, T) into the holes on the base panel (R). Using the Phillips head screwdriver to turn the locking nut in clockwise direction up to 180° from the connection joint to properly secure the panels. 3.
  • Página 10 ASSEMBLY INSTRUCTIONS (CONTINUED) 4. Attach the middle walls (C, D) into the holes in the middle of the base panel (R). Turn the locking nut in clockwise direction up to 180° from the connection joint to properly secure the walls. 5.
  • Página 11 ASSEMBLY INSTRUCTIONS (CONTINUED) 6. Tilt the middle walls (C, D) slightly outwards and attach the center shelf (B) to the middle walls. Make sure the middle walls are pushed back to vertical position to secure the center shelf. 7. As shown in the diagram, insert the center back panel (I) and back panels (J) along the grooves of the middle walls (C, D) and outer walls (E, F).
  • Página 12 ASSEMBLY INSTRUCTIONS (CONTINUED) 8. Assemble the top (A) onto the middle walls (C, D) and outer walls (E, F). Turn the locking nut in clockwise direction up to 180° from the connection joint to properly secure the top. 9. Insert shelf pins (AA) at desired height, ensuring they are level.
  • Página 13 ASSEMBLY INSTRUCTIONS (CONTINUED) 10. Insert the top pin of the right door (H) into the hole of the plastic nut under the top (A). Pull the latch to re-tract the pin on the bottom of the right door (H) and position it over the hole of the plastic nut on the base panel (R).
  • Página 14 ASSEMBLY INSTRUCTIONS (CONTINUED) 12. Remove the film from the adhesive on the top of the fireplace grate (N) and place the fire log (M) on the center of the fireplace grate (N). 13. Insert the pins at the fireplace glass front (Q) onto the holes of the plastic nuts on the base panel (R).
  • Página 15 ASSEMBLY INSTRUCTIONS (CONTINUED) WARNING: You must install the tip restraint hardware to help prevent any accidents or damage to the unit. We strongly recommend attaching the tip restraint hardware to a wall stud and your unit. For all other wall types, please visit your local hardware store to obtain the proper hardware.
  • Página 16 MAXIMUM RECOMMENDED WEIGHT LOADS FITS UP TO MOST 127 cm / 50 in FLAT PANEL TVS MAXIMUM LOAD 26.3 kg / 58 lb MAXIMUM LOAD 9.07 kg / 20 lb MAXIMUM LOAD 6.8 kg / 15 lb MAXIMUM LOAD 6.8 kg / 15 lb MAXIMUM LOAD 6.8 kg / 15 lb MAXIMUM LOAD 6.8 kg / 15 lb CAUTION: This console is intended for use with flat panel TV’s only.
  • Página 17 OPERATING INSTRUCTIONS Control Panel Remote Control To use the remote control, first remove the plastic tab by gently pulling it out of remote control. Controls and Display The control panel will display the heater setting when the unit power is turned ON. Whichever control icon you press will display the current setting of the corresponding function.
  • Página 18 OPERATING INSTRUCTIONS (CONTINUED) Heater Function • Press the HEATER ICON to display the current heater setting. • Press the HEATER ICON again to scroll down through the heater settings. Note: Long-hold the icon to quickly scroll through settings. • Set the heater to “HI” (High) to have the heater run continually. •...
  • Página 19 CARE AND MAINTENANCE • Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are cleaning the heater or fireplace. • Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
  • Página 20 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Error E1 displayed on The overheat sensor has Unplug unit, wait 15-20 minutes, then the sensor will reset control panel. been engaged. itself. Plug the unit back in and turn on the heater. If the problem persists, call customer service.
  • Página 21 ONE-YEAR LIMITED WARRANTY The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Install and operate this electric fireplace in accordance with the installation and operating instructions furnished with the product at all times.
  • Página 22 For replacement parts, call our customer service department at 877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at partsplus@lowes.com. PART DESCRIPTION PART # 1730FM-23-273-TOP Left Middle Wall 1730FM-23-273-LEFT MIDDLE WALL Right Middle Wall 1730FM-23-273-RIGHT MIDDLE WALL Left Outer Wall 1730FM-23-273-LEFT OUTER WALL Right Outer Wall 1730FM-23-273-RIGHT OUTER WALL...
  • Página 23 ARTÍCULO #4976292 REPISA PARA CHIMENEA ELÉCTRICA PARA SISTEMA DE STYLE SELECTIONS y el diseño del logotipo son marcas comerciales o marcas registradas de LF, LLC. Todos los derechos reservados. AUDIO Y TV MODELO #1730FM-23-273 ADJUNTE SU RECIBO AQUÍ Número de serie _______________ Fecha de compra _______________ ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento...
  • Página 24 ÍNDICE Contenido del paquete ........................25 Aditamentos............................26 Información de seguridad ........................26 Preparación ............................30 Instrucciones de ensamblaje ......................30 Cargas máximas de peso recomendadas ..................38 Instrucciones de funcionamiento ....................... 39 Cuidado y mantenimiento ........................41 Solución de problemas ........................42 Garantía limitada de un año ......................
  • Página 25 CONTENIDO DEL PAQUETE PIEZA DESCRIPCIÓN CANTIDAD PIEZA DESCRIPCIÓN CANTIDAD Parte superior Estante Repisa central Pared de ladrillos de la chimenea Pared del medio izquierda Leño para chimenea Pared del medio Rejilla para chimenea derecha Control remoto (batería Pared exterior en el interior) izquierda Parte frontal del vidrio Pared exterior derecha...
  • Página 26 ADITAMENTOS (NO SE MUESTRAN EN TAMAÑO REAL) PIEZA DESCRIPCIÓN CANTIDAD Pasador de repisa Perno Perno con perilla Aditamento de contención antivuelcos Aplicador de retoque INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes • Reorientar o reubicar la antena de recepción. de intentar ensamblar, usar o instalar el producto.
  • Página 27 INFORMACIÓN DE SEGURIDAD (CONTINUACIÓN) • NO pase el cable debajo de alfombras. NO cubra Las modificaciones que no estén aprobadas por la el cable con alfombras de pasillo, tapetes u objetos parte responsable del cumplimiento podrían anular la autorización del usuario para utilizar el equipo. similares.
  • Página 28 INFORMACIÓN DE SEGURIDAD (CONTINUACIÓN) • Cada superficie prevista para soportar una carga • “ADVERTENCIA: la colocación de equipos de audio debe tener una declaración correspondiente en las o video en muebles no diseñados específicamente instrucciones de uso que indica la carga máxima en para soportar tales equipos puede causar la muerte kilogramos (libras) prevista para esa superficie.
  • Página 29 INFORMACIÓN DE SEGURIDAD (CONTINUACIÓN) Conexión eléctrica Instrucciones de puesta a tierra • Se requiere un circuito de 15 amperios, 120 voltios, • Este calentador se diseñó para usarse con 60 Hz con un tomacorriente con la debida puesta 120 voltios. El cable tiene un enchufe como se a tierra.
  • Página 30 PREPARACIÓN Antes de empezar a ensamblar el producto, asegúrese Tiempo estimado de ensamblaje: de que todas las piezas estén presentes. Compare las minutos piezas con la lista del contenido del paquete y de los Herramientas necesarias para el aditamentos. No intente ensamblar, instalar o usar el ensamblaje (no se incluyen): destornillador producto si faltan piezas o si están dañadas.
  • Página 31 INSTRUCCIONES DE ENSAMBLAJE (CONTINUACIÓN) 2. Inserte el riel del panel base ensamblado (S, T) en los orificios del panel base (R). Con el destornillador Phillips, gire la contratuerca en dirección de las manecillas del reloj hasta 180° desde la junta de conexión para asegurar correctamente los paneles.
  • Página 32 INSTRUCCIONES DE ENSAMBLAJE (CONTINUACIÓN) 4. Fije las paredes centrales (C, D) en los orificios del centro del panel base (R). Gire la contratuerca en dirección de las manecillas del reloj hasta 180° desde la junta de conexión para asegurar correctamente las paredes. 5.
  • Página 33 INSTRUCCIONES DE ENSAMBLAJE (CONTINUACIÓN) 6. Incline las paredes centrales (C, D) ligeramente hacia afuera y fije el estante central (B) a las paredes centrales. Asegúrese de que las paredes centrales estén hacia atrás, en posición vertical, para asegurar el estante central. 7.
  • Página 34 INSTRUCCIONES DE ENSAMBLAJE (CONTINUACIÓN) 8. Ensamble la parte superior (A) en las paredes centrales (C, D) y las paredes exteriores (E, F). Gire la contratuerca en dirección de las manecillas del reloj hasta 180° desde la junta de conexión para asegurar correctamente la parte superior.
  • Página 35 INSTRUCCIONES DE ENSAMBLAJE (CONTINUACIÓN) 10. Introduzca el pasador superior de la puerta derecha (H) en el orificio de la tuerca de plástico situada debajo de la parte superior (A). Tire el pestillo para retraer el pasador de la parte inferior de la puerta derecha (H) y colóquelo sobre el orificio de la tuerca de plástico en el panel base (R).
  • Página 36 INSTRUCCIONES DE ENSAMBLAJE (CONTINUACIÓN) 12. Retire la película del adhesivo en la parte superior de la rejilla para chimenea (N) y coloque el leño para chimenea (M) en el centro de la rejilla para chimenea (N). 13. Inserte los pasadores del frente del cristal de la chimenea (Q) en los orificios de las tuercas de plástico del panel base (R).
  • Página 37 INSTRUCCIONES DE ENSAMBLAJE (CONTINUACIÓN) ADVERTENCIA: debe instalar el aditamento de contención antivuelcos para ayudar a evitar accidentes o daños a la unidad. Recomendamos encarecidamente fijar el aditamento de contención antivuelcos a un montante de pared y a su unidad. Para todos los demás tipos de pared, visite su ferretería local para obtener los aditamentos adecuados.
  • Página 38 CARGAS MÁXIMAS DE PESO RECOMENDADAS SE ADAPTA A LA MAYORÍA DE LOS TELEVISORES DE PANTALLA PLANA DE 127 cm/50 pulg. CAPACIDAD MÁXIMA: 26,3 kg/58 lb CAPACIDAD MÁXIMA: 9,07 kg/20 lb CAPACIDAD MÁXIMA: 6,8 kg/15 lb CAPACIDAD MÁXIMA: 6,8 kg/15 lb CAPACIDAD MÁXIMA: 6,8 kg/15 lb CAPACIDAD MÁXIMA: 6,8 kg/15 lb PRECAUCIÓN: esta consola está...
  • Página 39 INSTRUCCIONES DE FUNCIONAMIENTO Panel de control Control remoto Para utilizar el control remoto, primero retire la lengüeta plástica. Para ello, retírela tirándola suavemente hacia afuera del control remoto. Controles y pantalla El panel de control mostrará la configuración del calentador cuando la unidad esté encendida. El ícono de control que presione mostrará...
  • Página 40 INSTRUCCIONES DE FUNCIONAMIENTO (CONTINUACIÓN) Función de calentador • Presione el ÍCONO DE CALENTADOR para mostrar la configuración actual del calentador. • Presione el ÍCONO DE CALENTADOR nuevamente para desplazarse hacia abajo a través de la configuración del calentador. Nota: mantenga presionado el ícono para desplazarse rápidamente por la configuración. •...
  • Página 41 CUIDADO Y MANTENIMIENTO • Asegúrese de que la unidad esté APAGADA, desenchufada y que los elementos de calefacción estén fríos cada vez que limpie el calentador o la chimenea. • Limpie el borde metálico con un paño suave y limpio humedecido con agua. NO use pulidores de latón ni limpiadores domésticos, ya que estos productos dañarán el borde metálico.
  • Página 42 SOLUCIÓN DE PROBLEMAS PROBLEMA CAUSA POSIBLE ACCIÓN CORRECTIVA El error E1 se muestra Se ha activado el sensor Desenchufe la unidad, espere de 15 a 20 minutos, luego el en el panel de control. de sobrecalentamiento. sensor se reiniciará automáticamente. Vuelva a enchufar la unidad y encienda el calentador.
  • Página 43 GARANTÍA LIMITADA DE UN AÑO El fabricante garantiza que su nueva chimenea eléctrica no presentará defectos de fabricación ni en los materiales durante un período de un año a partir de la fecha de compra, siempre y cuando se cumplan las siguientes condiciones y limitaciones. Instale y use el la chimenea eléctrica según lo indican las instrucciones de instalación y funcionamiento provistas con el producto en todo momento.
  • Página 44 Pared exterior derecha 1730FM-23-273-RIGHT OUTER WALL Puerta izquierda 1730FM-23-273-LEFT DOOR Puerta derecha 1730FM-23-273-RIGHT DOOR Estante 1730FM-23-273-SHELF Pared de ladrillos de la chimenea 1730FM-23-273-INSERT WALL BRICK Leño para chimenea FIRE LOG 1 Rejilla para chimenea GRATE A Control remoto RC-HE85EL01 Calentador...