Descargar Imprimir esta página

FAFREES F7 Manual Del Usuario página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Unfoldinginstructions
1
Remove the ebike from the
package.
4
Pass the screws through the
headlight mounting holes and
the fender holes, then tighten
with a tool.
2
Raise the stem and lock it.
5
Adjust the angle of the handlebar stem to
the position perpendicular to the frame ,
first lock the screws of the stem cover, and
then lock the two screws pointed by the
arrows.
3
Take out the front wheel set
A rod is pierced on the center shaft
and align it with the clearance
of the wheel. Tighten the nuts at
of the front brake before
both ends, and then use a wrench to
installing it, then install.
lock it in a clockwise direction.
6
Seat post
quick release
Install the seat, adjust it to a suitable
height and fix it with quick release.
05
Check whether there is a
gap on both sides of the
disc rotor after locking.
7
The left pedal is tightened
counterclockwise and the
right pedal is tightened
clockwise.

Publicidad

loading