Uline H-2489A Instrucciones De Montaje página 5

5
6
Figure 3
Two Person Assembly Required
Decide whether installing into drywall or into
wood or concrete.
DRYWALL INSTALLATION
Mark holes where screws are to be located. Drill
holes using 1/4" drill bit. Mount locker to wall with
eight anchors and eight small screws using a Phillips
screwdriver. (See Figure 4)
Figure 4
PAGE 5 OF 15
ASSEMBLY
COAT ROD ASSEMBLY
1. Place unit on its back so doors are facing the
ceiling. (See Figure 3)
2. Slide coat rod brackets (5) over coat rod from left to
right. Secure brackets to bottom lips on horizontal
frame using bolts and nuts (7). (See Figure 3)
7
WALL-MOUNTING
WOOD/CONCRETE INSTALLATION
Mark holes where screws are to be located. Drill holes
using 1/4" drill bit. Mount locker to wall with eight large
screws and eight washers using a 10 mm socket wrench.
(See Figure 5)
Figure 5
1-800-295-5510
uline.com
1220 IH-2489A