Renfert SIMPLEX Manual De Instrucciones página 37

5.8 Printing an object
A video on this topic is provided under the following link
www.renfert.com/simplex-10-en
To print a 3D object, SIMPLEX requires toolpath information that is generated from 3D object CAD files
such as �obj or �stl� Toolpath information is known as a "G-code"�
Sample G-codes are stored on the USB flash drive provided. You can use these to immediately
carry out test prints.
Make sure to use the G-code for the currently loaded filament. Using an incorrect G-code can
cause misprints or damage to the printer.
The following G-codes are available:
G-Code SIMPLEX study model, working model, multi-use model
G-Code SIMPLEX aligner model
5.8.1 Loading an object from a USB flash drive
⇒ Switch off the SIMPLEX unit (13).
⇒ Insert the USB flash drive into the USB port (11) on the SIMPLEX unit.
⇒ Switch on the SIMPLEX unit (13).
⇒ Select the USB
⇒ Use the arrows
Using the right arrow
through the directory structure of the USB flash drive.
⇒ Press the printer icon
♦ The unit warms the extruder and the print bed to the temperatures stored in
the G-code�
♦ As long as the temperatures have not yet been reached, the two letters "H"
and "B" are shown in red on the display�
H: Head = Print head
B: Bed = Print bed
♦ As soon as the stored temperatures are reached with sufficient accuracy, the
color of the letters changes to white, and printing begins�
During printing, the following information is shown on the display:
• Name of the file to be printed
• Head (H) and bed (B) temperature
• Z-position information
• Printing speed
• Filament: remaining / total
• Progress bar with information in % as well as elapsed time / total time required.
and via the QR code shown.
menu�
/ to select the file name of the object.
and the "up directory"
to start printing�
- 17 -
==> Filament TEMP1
==> Filament TEMP2
icon, you can navigate
11
13
13
Fig. 34
Fig. 35
Fig. 36
Fig. 37
en