Technical Data Technical Data - McCulloch M46-125 WR Manual De Instrucciones

Technical data
Engine
Engine manufacturer
Cylinder displacement, cm
Speed, rpm
Nominal engine output, kW (see note 1)
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
*Engine oil
Weight
Machine with empty tanks, kg
Noise emissions (see note 2)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A) 80
Vibration levels, a
hveq
2
Handle, m/s
Cutting system
Cutting height, mm
Cutting width, cm
Cutter
Article number
Bagger capacity, litre
Note 1 The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine
for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value.
Actual power output for the engine installed on the final machine will depend on the operating speed, environmental
conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
EC.
Note 3: Noise pressure level according to EN ISO 5395. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to EN ISO 5395. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 0.2 m/s
*Use engine oil of quality SF, SG, SH, SJ or higher. See the viscosity chart in the engine manufacturer's manual and
select the best viscosity based on the expected outside temperature.
66 – English
TECHNICAL DATA
3
dB (A)
WA
(see note 4)
2
.
M46-125WR M46-140WR
Briggs & Stratton Briggs & Stratton
125 140
2900 2900
1,6 1,9
QC12YC QC12YC
0,5 0,5
0.8 0.8
SAE 30/SAE 10W-30 SAE 30/SAE 10W-30
31 31
94 94
95 95
80
3,3 3,3
30-80 30-80
46 46
Combi 46 Combi 46
5811889-10 5811889-10
50 50
WA
M51-140WR
Briggs & Stratton
140
2900
1,9
QC12YC
0,5
0.8
SAE 30/SAE 10W-30
32
96
97
82
2,9
30-90
51
Combi 51
5041133-02
60
) in conformity with EC directive 2000/14/