Publicidad
Idiomas disponibles
Idiomas disponibles
Mount outdoor sensor
3
Replacing outdoor sensor
At T10+ thermostat:
1 Open the menu.
2 Choose Installer options and
enter passcode.
3 Tap Devices & Sensors.
4 Select Outdoor Sensor.
5 Select Delete.
After the outdoor sensor has
been deleted you can add a new
outdoor sensor by selecting "Add"
as shown on page 2.
Français : voir la page 7 • Español: vea la página 13
Mount the sensor on
a vertical exterior wall,
at least 6 inches below
any overhang. Choose a
location protected from
direct sunlight.
securely in bracket,
M28491A
facing away from
3
Place sensor
wall.
Devices
& Sensors
M28492B
Delete
M38792
33-00604EFS—05
Publicidad
