INTRODUCTION............................................................ 6
SAFETY..........................................................................7
ASSEMBLY..................................................................10
OPERATION................................................................ 11
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
(Fig. 1 )
1. Operator presence control bar
2. Grass catcher
3. Rear door
4. Electrical powerhead
5. Cutting height lever
6. Battery charger
7. Operator's manual
8. User control interface
9. Battery pack
10. Battery cover
11. Power button
12. Cutting mode button
13. Mulch plug
14. State of charge lights
15. Key
16. Drive bail
Symbols on the product
(Fig. 2 )
Warning
(Fig. 3 )
Read this manual
Please read the operator's manual carefully
and make sure that you understand the
(Fig. 4 )
instructions before use.
Please read the operator's manual carefully
and make sure that you understand the
(Fig. 5 )
instructions before use.
(Fig. 6 )
Use approved eye protection
(Fig. 7 )
Use approved hearing protection
(Fig. 8 )
Use approved head protection
(Fig. 9 )
Use approved hearing protection
6
Contents
MAINTENANCE........................................................... 12
TECHNICAL DATA...................................................... 15
CONFORMITY..............................................................16
INTRODUCTION
(Fig. 10 )
(Fig. 11 )
(Fig. 12 )
(Fig. 13 )
(Fig. 14 )
(Fig. 15 )
(Fig. 16 )
(Fig. 17 )
(Fig. 18 )
(Fig. 19 )
(Fig. 20 )
(Fig. 21 )
(Fig. 22 )
(Fig. 23 )
(Fig. 24 )
(Fig. 25 )
(Fig. 26 )
Warning: rotating blade. Keep hands and
feet clear.
Warning: rotating parts. Keep hands and
feet clear.
Keep hands and feet away from rotating
blades. Do not open or remove the
protective shields while the engine or motor
runs.
Keep persons and animals at a safe
distance from the work area.
Before and while walking rearward, look
behind and down for small children, animals
or other risks that can cause you to fall.
Look out for thrown objects and ricochets.
Keep persons and animals at a safe
distance from the work area.
Slope hazard
Stop the engine and remove the ignition
cable before repairs or maintenance.
Hot surface
Always stop the engine before refueling.
Risk of explosion.
Electrical shock
Remove the key before repair, adjustment,
set-up or transport.
Power button
Motor on
Motor control handle engaged
778 - 004 - 23.10.2018