Descargar Imprimir esta página

Beko BFFD3626SS Manual Del Usuario página 17

Ocultar thumbs Ver también para BFFD3626SS:

Publicidad

Idiomas disponibles

Idiomas disponibles

5
Preparation
Before starting to use the product, check that all
preparations are made in accordance with the
instructions in sections "Important instructions for
safety and environment" and "Installation".
Clean the interior of the refrigerator as
recommended in the "Maintenance and
interior is dry before operating.
Plug the refrigerator into the grounded wall
outlet. When the door is opened the interior
illumination will turn on.
To be able store maximum food in the freezer
compartment of your refrigerator, the upper
drawer has to be removed and placed on top
of glass shelf. Power consumption stated for
your refrigerator has been determined after
removing the icematic and the upper drawers
as to allow maximum loading. It is strongly
recommended to use the lower drawers in the
freezer and the multizone compartment while
loading.
Run the refrigerator without putting any food
for 6 hours and do not open its door unless
absolutely required.
Do not allow the food to touch the temperature
sensor in fresh food compartment.
C
starts up. The liquids and gases sealed
within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.
C
Front edges of the refrigerator may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.
To allow the fresh food compartment keep its
ideal storage temperature, sensor must not be
covered by food.
17 / 31 EN
Refrigerator / User Manual

Publicidad

loading