Publicidad
Idiomas disponibles
Idiomas disponibles
23) Do not use this heater with a timer, remote control or remote ignition system, as there is a risk of fire if the heater is
covered or incorrectly positioned.
24) Do not use multiple sockets but only sockets with single output with specific power.
25) Do not fix safety switches with adhesive tape due to fire hazard.
26) Avoid the use of extensions that could cause the appliance to overheat.
27) When disconnecting the plug, hold it firmly to avoid electric shock.
28) It is absolutely forbidden to disassemble or repair the appliance due to the risk of electric shock, if necessary contact
the retailer or a specialized technician.
29) Do not place objects on the appliance due to fire hazard.
30) Do not use the product with wet or damp hands, or with bare feet. Do not touch the connection with wet hands.
31) Never use the appliance in the presence of flammable or explosive materials.
32) Keep the product clean. Do not insert objects into the slots of the appliance. Do not insert your fingers into the air
outlet grille.
33) Do not pull the power cord to move the product or to remove the plug from the socket.
34) Attention: do not cover.
35) Do not install directly under a power outlet.
36) Attention: in the event of a malfunction do not attempt to repair yourself to avoid any type of electric shock.
37) Make sure that the power cord is unrolled, not twisted or excessively bent.
38) Never leave the appliance unattended while it is running: make sure it is switched off and that the power cord is
unplugged from the electrical outlet when not in use.
39) To avoid electric shocks, do not immerse the power cord, electrical sockets or the appliance in water or other liquids.
40) Attention: this product does not have a temperature control circuit. Do not use in small rooms and with people who
cannot leave independently, unless constant supervision is provided
ASSEMBLING
Before using the appliance it is necessary to assemble the feet (supplied separately in the
packaging).
They must be connected to the base of the item using the 4 screws provided, making sure to
screw them properly into their seats on the sides of the base.
Publicidad
