AQV OK770 Manual De Instrucciones página 16

3.2.1 Recording Interface
1. Recording Mode: This symbol indicates the current
mode. The current mode is the video mode. You can press
MODE button to switch to taking picture mode and playback
mode.
taking picture mode playback mode
2. Recording Status: The flashing red dot means that the
recording is in progress. You can press OK button to start or
pause the recording.
3. WDR：Wide Dynamic Range
4. G-sensor: This symbol represents the sensitivity of the
G-sensor. You can set the sensitivity by pressing MENU
button to enter the menu, pressing DOWN button to find out
"Gravity Sensor" option: off, low, medium, high. (Because
11