AQV OK770 Manual De Instrucciones página 22

4.4 Initial Settings
Before using the dash cam we recommend Formatting the
Inserted Micro SD Card, setting the correct Language, Time
and Date. After completing the initial setting, you can power
off and restart to check the setting status.
Note:
1. Menus cannot be accessed while the camera is
recording. Please stop the recording before you access the
menu. (The blinking red dot on the screen means the
camera is recording video.)
2. Formatting your Micro SD Card will delete all files from
the card. Once these files have been deleted you will not be
able to recover them.
3. After setting the initial settings, Press MENU button to
return to standby mode. Press OK button and the camera
starts working.
4.5 View the Recorded Videos
4.5.1 Playing Back Video on dash cam
1) Press OK button to stop recording (no red dot flashing on
the screen)
2) Press 2 times MODE button to enter playback mode.
3) Select a video by pressing UP or DOWN button. Press
OK button to play the video.
4) There is a symbol in the upper left corner of the
video, which means that this video has been locked and it
will not be overwritten.
4.5.2 Playing Back Video on a PC
1) Connect the dash cam to the computer using the USB
cable(included).
2) "Mass Storage" "PC camera" will be displayed on the
17