Altrad Belle GROUP Pro Trowel 900 Manual Del Operador página 14

GB
Pro Trowel Manual Clutch Controls
The controls shown below in Diagram 1. are use Engage and Disengage the Manual Clutch.
Pro Trowel Throttle Control Lever
The Throttle Lever shown below in Diagram 2. is used to control the Engine RPM and the Blade RPM. This can also be seen in
Figure 2 of the Decal shown below.
1.
Handle Bar
and Grip
Clutch Aid
Correct Manual Clutch Engagement Method
Diagram 3 below, shows the correct engagement method for the Pro Trowel Manual Clutch. The Manual Clutch must be fully engaged
at all times during the use of the Trowel. This can also be seen in Figure 1 of the Decal shown below.
Incorrect Manual Clutch Engagement Method
Diagram 4 below, shows the incorrect way to operate the Manual Clutch, as the Clutch Lever is not fully engaged. The Clutch must
never be used to control the Blade Speed. Doing this may allow the belt to slip and ultimately burn out the belt. This can also be
seen in Figure 1 of the Decal shown below.
3.
Clutch Lever
fully engaged.
Operating Instructions
Clutch
Lever
1.
2.
Throttle
Control Lever
4.
Clutch Lever not fully engaged.
Which may allow the belt to
slip and reduce belt life.
2.
14
800/99738/0