Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
The Belle Group Pro Trowels are designed to give many years of trouble free operation. It is, however, important that the simple
regular maintenance listed in this section is carried out. It is recommended that an approved Belle Group dealer carries out all major
maintenance and repairs. Always use genuine Belle Group replacement parts, the use of spurious parts may void your warranty.
Before any maintenance is carried out on the machine, switch off the engine. If working on a petrol engined machine, disconnect the
HT lead from the sparkplug.
Running In Period
When the trowel is ¿ rst used from new, the engine oil must be changed after the initial running in period.
(see engine manual for full detail).
Routine Maintenance
Engine Oil
Check Level
Change
Air Filter
Check Condition
Clean / Replace
Spark Plug
Check / Clean
Cutout Switch Check
Belt Tension
Check
Oil/Fuel Type & Quantity - Spark Plug Type
Petrol
GX160
Engine
Petrol
EX17
Engine
Petrol
GX270
Engine
Petrol
EX27
Engine
Gearbox
Note:
-
Check the gearbox oil at regular intervals and top-up when necessary. Make sure the oil is at the centre of the sight glass. To ¿ nd
out what grade of oil should be used in the gearbox, please contact the Belle group Warranty Department (+44 (0)1298 84606)
-
Grease Spider Arm Assembly prior to storage and at regular intervals.
Service and Maintenance
Daily
9
Oil Type
Quantity
SAE
0.6ltr
10W-30
SAE
1.1ltr
10W-30
SAE
1.1ltr
10W-30
SAE
1.1ltr
10W-30
EP90
0.6ltr
after ¿ rst
¿ rst month
4 hours /
/ 20 h
Weekly
9
9
9
9
Fuel Typ
Capacity
Unleaded
2.5ltr
Unleaded
3.6ltr
Unleaded
6.0ltr
Unleaded
6.1ltr
NA
NA
15
3 month
6 month
/ 50 h
/ 100 h
9
9
9
9
Spark Plug
Electrode
Type
Gap
BM4A or
0.6 - 0.7mm
BMR4A
NGK
0.6 - 0.7mm
BR-6HS
NGK
0.7 - 0.8mm
BPR-6HS
NGK
0.6 - 0.7mm
BR-6HS
NA
NA
GB
Publicidad
Tabla de contenido
