Free2Move eSolutions easyWallbox Manual De Instalación página 480

1.4. Warnings
Danger of electric shock and fire
Before using easyWallbox, read the contents of this manual carefully to

acquire familiarity with the instructions for use and the safety indications.
Before starting installation, ensure that

to any power supply. Any installation, maintenance and dismantling
operation should only be done when disconnected from the power supply.
Before installing or using the device, make sure that no damage has

occurred to any component. Damaged components can lead to
electrocution, short circuits, and fire due to overheating.
A device with damage or defects must not be used.
Install easyWallbox

in general.
Before carrying out any maintenance operation, ensure that the power

supply is off.
Before installing easyWallbox, ensure that the main power source used

is disconnected.
Before putting back or moving easyWallbox, ensure that the device is not

attached to the power supply.
Use of easyWallbox

intended for.
Installation, maintenance, or repairs not made correctly may lead to risks

for the user. Please ensure that
operating conditions.
The apparatus must be connected to an electricity network in compliance

with local and international standards and all the technical requisites
indicated in this manual.
away from petrol cans or combustible substances
must be limited to the specific applications it is
easyWallbox
easyWallbox is not connected
is only used in the correct
6