Free2Move eSolutions easyWallbox Manual De Instalación página 495

4.1. Choice of position
easyWallbox
different spaces where its continual movement is required.
Before installing the device, check the feasibility. In detail, the position chosen
for the installation of
be on a vertical and flat surface, as shown in Chapter 4.5; weak surfaces

that do not ensure robust resistance must be avoided
allow easy connection to the power supply and the electric vehicle to

charge
not be an obstacle to the movement of the electric vehicles to charge

not have material or equipment on the whole of the surface required for

the installation
respect local legislation on electrical installations, fire prevention measures

and rescue methods in the installation site.
easyWallbox
at risk of explosion (EX environment)

used for escape routes

where articles may fall on it (e.g. suspended ladders or car tyres) or where

it is likely to be hit and damaged (e.g. close to a door or in vehicle operating
spaces)
where there is a risk of pressurised jets of water (e.g. because of washing

systems, power washers or garden hoses).
easyWallbox
on walls that are not fixed;

on walls in inflammable material or covered in inflammable material

(e.g. wood, carpet, etc.).
is only for fixed wall mounting, and therefore cannot be used in
easyWallbox
must not be installed in places:
cannot be installed:
must:
21