Free2Move eSolutions easyWallbox Manual De Instalación página 484

To prevent possible damage to the electric vehicle due to overvoltage, it is
strongly recommended that the power supply circuit of the connection point
be protected with a Surge Protection Device (SPD).
All the instructions in this Installer's Manual are intended to be carried out
only by qualified personnel with the skills described in Chapter 1.3.
Before starting installation, the qualified personnel must check
that they can access easyWallbox PowerUp following the passages
required by the app (see Chapter 4.11).
Installation should comply with IEC 60364-7-722 Low-voltage electrical
installations, Part 7-722: Requirements for special installations or locations,
Supplies for electric vehicles.
The installation should comply with local installation regulations.
easyWallbox is classified for electromagnetic compatibility (EMC)
environment type B.
10