Publicidad
Idiomas disponibles
Idiomas disponibles
C
Useful information
Troubleshooting
Fault
The programme does not
start.
Water remains inside the
machine.
Machine stops during
washing.
Shaking and hitting noises
are heard during a wash
operation.
Possible cause
Your Dishwasher is not
plugged in.
Your Dishwasher is not
switched on.
Fuse blown.
Water inlet tap is closed.
Your Dishwasher door is
open.
Water inlet hose and
machine filters are clogged.
Water drain hose is clogged
or twisted.
The filters are clogged.
The programme is not
finished yet.
Power failure.
Water inlet failure.
The spray arm is hitting the
dishes in the lower basket.
35
EN
Troubleshooting
Plug your Dishwasher in.
Switch your Dishwasher
on by pressing the On/Off
button.
Check your indoor fuses.
Turn on the water inlet tap.
Close the Dishwasher door.
Check the water inlet hose
and machine filters and
make sure they are not
clogged.
Check the drain hose, then
either clean or untwist it.
Clean the filters.
Wait until the programme is
finished.
Check mains power.
Check water tap.
Move or remove items
blocking the spray arm.
Publicidad
