Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
1. On/Off Button
Switch the machine on by pressing the On/Off button.
2. Program Selection Button
Select a suitable programme by pressing Program Selection button. The selected program
indicator
will be on. For the details of the programs refer to section Program Table.
2.1
3. Delay Button
You can delay the start time of the programme for 1-2...24 hours by pressing the Delay button
before the programme starts. To activate the delay time, press Start/Pause button
7
. The
delay indicator
will be on. If you want to change the delay time, first press the Start/Pause
3.1
button
and then the delay button to select a new delay time. To activate the new delay time,
7
press the Start/Pause button
again. To cancel the delay, you need to switch to 0 hour by
7
pressing the Delay button.
If you switch off the machine after selecting and activating the delay time, the delayed time
is cancelled.
4. Remaining Time Indicator
Programme flow can be monitored via the Wash, Rinse, Dry, End indicators
and Remaining
10
Time Indicator.
5. Energy Save Button
Press the Energy Save button to activte the Energy Save option. Energy Save indicator
will
5.1
be on. Select the Energy Save option to enable the door of the machine to open at the end of
the programme to increase drying efficiency. This function also saves energy by operating at
a lower temperature.
6. Half Load Button
Thanks to the half load function in your machine, you can shorten the durations of the
programmes that you have selected and reduce the energy and water consumption by using
half load electricity and water. Half Load indicator
will be on.
6.1
26
EN
Publicidad
