Publicidad
Idiomas disponibles
Idiomas disponibles
Before use
English
Change the programme in the middle of the cycle
A wash cycle can only be changed if it has been running for a short time, otherwise the detergent may
have already been released and the dishwasher has already drained the water used for washing. In this
case, it is necessary to restart the dishwasher and refill the detergent dispenser. To reset the dishwasher,
follow the instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm stops working, you can open the door
completely.
2. Press the programme button for more than three seconds so that the dishwasher remains in the stan-
dby state.
3. Press the Programme button to select the desired cycle.
3 sec
EC O
Automatic opening
After washing, the door will open automatically for better
drying effect.
NOTE:
The dishwasher door must not be locked when it is set to
open automatically.
This may damage the door lock function.
59
infiniton.es
Publicidad
