Infiniton DIW-BB681 Manual De Instrucciones página 65

Manteinance and cleaning
Spray arms
It is necessary to clean the sprinkler arms regularly, as the chemicals in the hard water clog the jets and
sprinkler arm bearings.
To clean the spray arms, follow the instructions below:
1
To remove the upper spray arm,
hold the nut and turn the arm
clockwise to remove it.
3
Wash the arms with warm
soapy water and use a soft
brush to clean the jets. Replace
them after rinsing them
thoroughly.
2
To remove the lower spray arm,
pull the spray arm upwards.
67
English
infiniton.es