Coral OSMOSIS H600 Manual De Instrucciones página 46

CONNECTION DIAGRAM
1. Drainage pipe
2. Drainage water
3. Incoming water
4. Purified water
1
HOW TO USE THE
QUICK CONNECTORS
Pipe inlet limit mark Marca de límite de
entrada del tubo
Safety clip
Clip de seguridad
5. 110-240V AC
6. Tap power cable
7. LED light for the tap
3
2
All parts of the product that are connected with PE
pipes are equipped with quick-connect fittings.
For connecting a PE pipe to a quick-connect fitting:
For disconnecting a PE pipe from a quick-connect
fitting.
1. Push the PE pipe into the fitting. There is a marking
on the end of the tube.
2. Remove the locking clip.
3. Push and hold the quick-connect fastener. It will
be fully inserted into the fitting.
4. Pull the PE pipe out of the fitting.
5. Slide the locking clip between the quick release
fastener and the fitting.
46
7
4
6
5
EN