Silvercrest SPG 2000 B2 Instrucciones De Uso página 12

Troubleshooting
Fault
The appliance is not
working .
The control
lamp 7 goes on
and off again at
frequent intervals .
The control lamp 7
does not light up .
If the malfunction cannot be corrected using one of the suggestions above, or if you have found some
other kind of malfunction, please contact Customer Service .
SPG 2000 B2
Cause
The plug is not connected to the mains
power .
The mains power socket is defective .
The thermostat 3 is not properly inserted .
The appliance is defective .
The appliance is maintaining the temper-
ature . To do this, the appliance has to
heat up briefly every so often . When this
occurs, the control lamp 7 lights up .
The appliance is defective .
The appliance has heated up .
Solution
Insert the plug into a mains
power socket .
Use a different mains power
socket .
Insert the thermostat 3 correctly
into the connection socket 2 .
Contact Customer Service .
This is not a defect .
Contact Customer Service .
This is not a defect .
GB │ IE │ 9 ■