STAR Water Systems S2000 Manual De Instrucciones página 12

ROUGH-IN - EXPOSED PUMP UNIT INSTALLATION
1. Position the macerator/tank unit a minimum of 1/8-in
from the wall with the inlet facing forward. Attach the
rubber coupling to the inlet using the worm drive clamp
provided.
2. Place the toilet in front of macerator/tank unit; aligning
the discharge of the toilet with the inlet of the macerator/
tank unit. Check to be sure that the rubber coupling will
bridge the gap adequately for final installation. The toilet
tank should be a minimum of 1/2-in. from the wall.
CAUTION: Do not connect rubber coupling to toilet at
this time.
3. Lightly mark the locations of the macerator/tank unit,
toilet and closet screw set locations on the floor.
1
2
3
Macerator/tank unit location
Toilet
Location
12
Wall
1/8 in.
Minimum
Rubber
Coupling
Clamp
Inlet
Wall
1/2 in. Minimum
Macerator
Unit
Inlet
Toilet Discharge
Closet
Screw Set
Locations
IL1751