STAR Water Systems S2000 Manual De Instrucciones página 17

TOILET INSTALLATION (CONTINUED)
5. Install the water supply line from the existing water
shut-off valve to the toilet water supply connection.
6. Open the water supply valve and check for leaks.
The toilet tank should fill to the proper level. Adjust if
required.
7. Flush the toilet and watch for proper operation. Listen for
the pump to start. The pump unit requires proper venting
in order for toilet to flush. Check for leaks. Repeat flush
cycles to assure proper operation.
5
Rubber Washer
Plastic Adapter
6
Water Supply
Shut-off Valve
7
17
Ballcock
Toilet
Tank
IL1739