Publicidad
Idiomas disponibles
Idiomas disponibles
LEVELING PUMP UNIT (CONTINUED)
NOTE: If macerator/tank unit will be hidden behind a
wall, be sure to allow access to the pump & switch after
installation.
2. Select a location which is readily accessible to
the existing discharge and vent lines. Installation
behind a wall will require extension kit 023260 (sold
separately).
TOILET ASSEMBLY
1. Turn the toilet tank upside down and rest on protective
padding. Install the tank to bowl gasket over the bottom
threads of the flush valve, making sure that the tank
gasket covers the flush valve nut and the tapered side is
toward the bowl.
CAUTION: Do not use pipe dope on any plastic or rubber
parts.
CAUTION: Be careful when tightening bolts or nuts
against china to prevent cracking the china.
2. Lift the toilet tank right side up and position the tank on the
bowl by centering the gasket and aligning holes on the
bowl. Install tank to bowl bolts and rubber washers with
narrow side down, through the tank and bowl.
2
1
Toilet Tank
Tank to Bowl
Gasket
Flush Valve
Threads
Flush Valve Nut
2
Toilet Tank
Tank to Bowl Bolts
Rubber Washer
9
IL1735
Toilet Bowl
IL1736
Publicidad
