Wahl 4550 Manual De Instrucciones página 10

E N G L I S H
f Keep the mains cable and appliance away from hot
surfaces.
f Make sure that the mains cable is not twisted or
kinked when stored.
General user information
Information about using the operating manual
de
f Before using the appliance for the first time, you must read and
understand the operating manual completely.
en
f Consider the operating manual as part of the product and store
it in a safe and accessible place.
fr
f This operating manual is also available in PDF format from
our service centres. The EC declaration of conformity can also
it
be requested in other official EU languages from our service
centres.
es
f Include this operating manual if passing the appliance on to
a third party.
pt
Explanation of symbols
nl
The following symbols are used on the appliance:
da
PROHIBITED
This symbol prohibits the use of the appliance near
sv
bathtubs, showers, washbasins and other water-filled
containers.
no
Protection class II symbol.
fi
tr
CE conformity marking.
pl
UKCA conformity marking for the British market.
cs
sk
EAC conformity marking for the Eurasian
hr
Economic Union.
hu
WEEE marking prohibiting the disposal of electrical and
sl
electronic devices with domestic waste.
ro
bg
The following symbols and signal words are used in this operating
manual:
ru
DANGER
uk
Danger of electrical shock which may result in serious
physical injury or death.
et
DANGER
lv
Danger of explosion which may result in serious physical
injury or death.
lt
el
10
ar
DANGER
Danger due to the use of flammable materials. Danger
of fire development which may result in serious physical
injury or death.
WARNING
Warning of possible physical injury or a health risk.
CAUTION
Information about danger of material damage.
Note with useful information and tips.
Action to be taken by owner.
f
Carry out these actions in the sequence described.
1.
2.
3.
Product description
Description of parts (Fig. 1)
A Air outlet
B Release button
C On/off switch, fan settings
D Air inlet
E Hanging loop
F Mains cable
G Round thermal brush Ø25 mm for small waves
H Round thermal brush Ø30 mm with extendable bristles for
medium waves
I Round thermal brush Ø38 mm for volume and large waves
Technical data
Operating voltage: 220 – 240 V / 50/60 Hz
Power consumption: 900 – 1100 W
Dimensions (Ø x L): 45 x 360 mm
Weight: 240 – 270 g without mains cable
Operating conditions
Ambient temperature: 0 °C – +40 °C
The hot air brush is safety insulated and radio screened. It meets
the requirements of EU Electromagnetic Compatibility Directive
2014/30/EU and Machinery Directive 2006/42/EC.
Operation
Preparation
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the hot air brush with the voltage
stated on the nameplate.