Publicidad
Idiomas disponibles
Idiomas disponibles
a)
The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b)
Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges, or moving parts. Damaged or tangled cords increase the risk
of electric shock.
e)
If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect it to electrical mains. Using an RCD reduces
the risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or the device itself in
water or other liquid. Do not use the appliance on wet surfaces.
2.2.
Safety in the workplace
a)
Keep the work area tidy and well-lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing, and use common sense
when using the unit.
b)
If you have any doubts as to whether the product is working properly or if it is
damaged, contact the manufacturer's service department.
c)
Repairs to the device may only be carried out by the manufacturer's service.
Do not attempt to repair the product on your own!
d)
In the event of a fire threat or fire, use only dry powder or carbon dioxide (CO
extinguishers to extinguish the device while it is operating.
e)
No children or unauthorized persons are allowed in the work area. Inattention
can cause you to lose control of the unit.
f)
Running the unit can generate dust and splitter, and protect bystanders
against any harm.
g)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
h)
Keep these instructions for use for future reference. If the product is to be
handed over to a third party, hand it over with this user manual.
i)
Keep packaging components and small installation parts out of the reach of
children.
)
2
Publicidad
