Publicidad
Idiomas disponibles
Idiomas disponibles
A6 – Air quality levels and ventilation recommendations
B – Side view
B1 – DC jack connection socket
C – Back view
C1 –
(minus / CO
C2 –
(plus / memory) button
C3 –
(dimmer) button
C4 –
(CO
2
C5 –
(CO
sound alarm) button
2
C6 – Insert DC jack into connection socket
C7 – DC jack of USB cable
Main features
•
Multicolored displays of CO
•
Swiss-made and patented photoacoustic sensor (PASens®) for
CO
detection
2
•
Wide CO
2
•
Colour display of ventilation recommendation on basis of CO
concentration in the air
•
Adjustable CO
•
Automatic baseline calibration on CO
•
MIN/MAX CO
•
Backlight with adjustable brightness levels
•
Built-in memory chip to save settings when power is off
•
USB/DC cable included
•
Table standing with optional wall mount bracket (included)
Installation
Plug in the DC jack of the enclosed USB/DC cable to the right back side of
your CO
monitor. Then plug in the USB of the other end to any USB port
2
with 5V~1A output.
Notes:
•
Only use the included USB/DC cable
•
Do not plug into any power source / adaptor with over 5V output as this
will damage your CO
calibration) button
2
high/low alert) button
measuring range from 400 to 5000 PPM
high or low value alert with optional acoustic alarm
2
memory with programmable duration up to 96 hours
2
monitor.
2
level similar to traffic lights
2
2
EN2
2
Publicidad
