Publicidad
Idiomas disponibles
Idiomas disponibles
Make sure the backside of your monitor is away from any heat source
or and not blocked. Keep it at least 2 cm away from the wall.
Since the factory calibration was made at 400 ppm, it should be
avoided to do an manual calibration of the monitor unless You can
guarantee a room with 400 ppm. The 20-minute manual calibration of
your monitor (by press-and-hold of the
in a well ventilated environment with as close to 400 ppm as possible
and only if absolutely needed.
Ventilation recommendation on the basis of CO
air Your CO
monitor measures and displays the CO
2
ventilation recommendations :
Measur-
ing
range
Over
2000
ppm eq
1501 –
2000
ppm eq
1001 –
1500
ppm eq
601 –
1000
ppm eq
400 –
600
ppm eq
Both
icons flash when the current CO2 exceeds 2000 ppm.
Setting the high and low CO
Press and hold the
the
icon appears.
Press the
Display status
alerts
2
button, the CO
or the
button to adjust the low alert level of CO
button) should only be done
2
digits "400" (default) flash and
2
EN4
concentration in the
in PPM with color
2
.
2
Publicidad
