KTM A61014986044 Instrucciones De Instalación página 24

5 ASSEMBLY
10
Info
The Connectivity Unit function must be activated with
the diagnostics tool after assembly and flashed with the
latest software.
This must be performed in an authorized workshop.
The Connectivity Unit is operated via the combination
instrument and must be enabled in the menu.
–
Position left mask spoiler.
–
Mount and tighten screws
Guideline
Screw, mask spoiler
502885-01
Final steps
–
Install the left fuel tank spoiler (see owner's manual).
–
Remove the battery cover (see owner's manual).
–
Install the side cover on the left (see owner's manual).
–
Mount the front rider's seat (see owner's manual).
–
Mount the passenger seat (see owner's manual).
6
.
M5 5 Nm (3.7 lbf ft)