Publicidad
Idiomas disponibles
Idiomas disponibles
LIGHTING
LIGHTING THE GRIDDLE
Lighting instructions are located under the bottom of the
NOTE:
control panel. Rotate out to follow the instructions.
1. Open lid during lighting.
2. Push and turn control knob to
electronic igniter and hold for 3-5 seconds
then turn to light front section of burner.
NOTE:
To confirm the burner is lit, look through the burner
viewing port above the control knob, then turn the control knob to
light the back section.
3. If ignition does not occur in 5 seconds,
turn the burner control off, wait 5
minutes, and repeat the lighting
procedure.
Burner Viewing Ports
Lighting instructions located here
18
INSTRUCTIONS
. Press the
DUAL
ZONES
SYMBOLS
Represents Unit is in "OFF" position
Represents Burner being lit
Represents Burner already lit
Represents Front Zone on
HIGH setting
Represents Dual Zones on
HIGH setting
FRONT
ZONE
Publicidad
