Halo ELITE 4B Guía Esencial página 26

Run a narrow bottle brush
3
through burner venturi several
times. (Do not use wire brushes.)
Brush the entire outer burner
4
surface to remove grime and rust.
Clean any blocked ports with a stiff
5
wire such as an open paper clip.
26
A
A
6
A
A
SECTION
A-A
Reinsert each burner carefully,
then fasten with M5 x 10 screws.
CAUTION
Burner venturi tubes must be reengaged
with the valve openings.
SECTION
A-A
Gas Orifice
Burner
DETAIL
Valve Outlets
C