IK Multimedia iLoud MTM Manual Del Usuario página 16

English
• keep the CAL/PRESET button pressed for more than 2 seconds;
• the CAL LED will start to blink blue and the front LED will start to blink white. Now you have 5 seconds of
time to move yourself away from the speaker so that the measurements won't be influenced by you staying
between the speaker and the microphone;
• at this point the calibration test signals production will start. During this time, the front LED will stay steady
ON blue. IMPORTANT: during the measurement process make sure that the environment is a silent as
possible, do not touch the speaker or the microphone, and make sure that the overall room setup is as
similar as possible to the one that will be used during normal iLoud MTM usage.
15